# Quick Answer: Which Engineers Scale Would Be Used For Half Size?

## Which is the engineers scale?

Engineer, or civil, scales, such as 1˝ = 10´ or 1˝ = 50´, are used for measuring roads, water mains, and topographical features.

The distance relationships also may be shown as 1:10 or 1:50.

2.

Architect scales, such as 1/4˝ = 1´-0˝ (1/48 size) or 1/8˝ = 1´-0˝ (1/96 size), are used for structures and buildings..

## What is the base unit that is divided in an engineering scale?

The basic unit of measure for metric scales is the millimeter (mm). Drafting scales are either open-divided or full-divided.

## What size is a 1 50 scale model?

Model scalesRatioMillimetres per foot1:506.096 mm1:486.350 mm1:456.773 mm1:43.57.02 mm95 more rows

## What does a scale of 1 50 mean?

1:50 is a ratio. it means you’re scaling 1 unit to 50 units. that could be inches (1″=50″) or miles (1 mile=50 miles) or anything else, but it’s a direct scale. that works better in metric, because their units scale in multiples of 10.

## What is the most common scale used for drawing houses?

“One Inch”, “One half Inch”, and “One quarter Inch” are common architectural scales, as well as “One eighth Inch” scale. For really large projects, smaller scales are used.

## What does a scale of 1 20 mean?

What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions. … For example a drawing drawn to a 1:20 scale would require a lot more intricacies than a 1:50 and 1:100 drawing.

## What does a 1/2 scale mean?

Full size on the metric scale is shown as 1:1. Half scale is 1:2. It is helpful to think of this as one unit on the drawing equals two units on the object. … This means the drawing of the object is twice as large as the object itself.

## What are standard engineering scales?

Engineers Engineering Scales units of measure are equal to parts per inch and parts per foot. The most common graduations are 10, 20, 30, 40, 50, 60 parts per inch, but there are scales available that have 100, 200, 300, 400, 500, 600 parts per foot. The graduations vary based on the application.

## What is the difference between 1 24 and 1 25 scale?

Registered. For display purposes, 1/24th and 1/25th scale are close enough for horseshoes, as they say. The difference in size is about 4 percent. You won’t be able to swap engine or chassis parts between the two scales, though — one won’t fit with the other.

## What size is a 1/72 scale model?

1:72 scale is a scale used for scale models, most commonly model aircraft, corresponding to one sixth of an inch representing one foot (or 1 inch to 6 feet). In other words, 72 of a given model placed end to end would represent the length of the real thing.

## What are the scale sizes for models?

Popular scales are, in order of size, 1:144, 1:72 (the most numerous), 1:48, 1:32, 1:24, 1:16, 1:8 and 1:4. Some European models are available at more metric scales such as 1:50. The highest quality models are made from injection-molded plastic or cast resin.

## What is an architect’s scale?

An architect’s scale is a specialized ruler designed to facilitate the drafting and measuring of architectural drawings, such as floor plans and Multi-view orthographic projections.